Monday I ended up finding a design (Harley Davidson) that I can use that is challenging. 2 Steps Taken to Reach Objective: Objective (s): Work on an idea for my advanced g-code and work in lab if have enough time. List issues / Complications: 1 3 4 I ok’d my design with you and then put it on graph paper to start marking coordinates. none I got on the internet and started researching ideas that are as challenging as sabo’s. I got it printed and started making coordinates where I needed to go Tuesday I ended up finding a mechanism and we took a look at it and believed we could get it to work. 2 Steps Taken to Reach Objective: Objective (s): Work on researching an idea for a shifter for the prototype car. List issues / Complications: 1 3 4 We mocked up a few pieces and we found out we have the space and material to finish the job. none I researched online and kept looking for good mechanisms that would work with our set-up. Wednesday Me and Dylan made the bracket for the L piece to shift. 2 Steps Taken to Reach Objective: Objective (s): Work on making the shifter for the prototype car. (making mechanism so we can shift from forward and neutral.) List issues / Complications: 1 3 4 We got the piece made and put together with the bar and i-lets. None. We used our researched idea and got the things we would need to build the mechanism. We tested the mechanism and it works. We are even able to go into reverse. (We can stop that if needed) Thursday Me and Dylan went down to welding and got the e-lets welded to the steel pipe and we also got the block tacked to shifter 2 Steps Taken to Reach Objective: Objective (s): Work in lab on the prototype car getting the shifter all finished up and together. List issues / Complications: 1 3 4 After we got them tacked we came back and put everything together and tightened up to test. Figuring out what length we needed and how to connect to the shifter. We started by getting the tools needed and tweaked a few things so they would move smoothly. After testing and completing the task we cleaned up our mess and cleaned our half of the lab. Friday We came back and we put everything back together and tightened things up. 2 Steps Taken to Reach Objective: Objective (s): Work in lab on the prototype car and finish it up! List issues / Complications: 1 3 4 We moved the body back over and put it on and we started to tighten our body mounts. none Me and Dylan took the parts down to welding and got all of them fully welded! We got all of them on except for our front right and we will work on that when we come back!