Monday We researched when our important dates were. 2 Steps Taken to Reach Objective: Objective (s): Work on coming up with our important dates and times. List issues / Complications: 1 3 4 We started talking about what is most important to be done on the car and least important. none We got together in our groups and talked about what our game plan is. We Tuesday I took measurements to see how long our new steel tie rods must be. 2 Steps Taken to Reach Objective: Objective (s): Work out in the lab on the formula car’s tie rods. List issues / Complications: 1 3 4 I got the measurements and got the inserts pressed and welded in place in the tie rod. none I set the steering so it was straight and full range of motion. Wednesday We got everything measured and cut the tubing. 2 Steps Taken to Reach Objective: Objective (s): Work in lab on Prototype car List issues / Complications: 1 3 4 I pressed the inserts into the tie rods. none We got the steering set on the prototype car and then started to take measurements. Got the inserts welded to the tubing. Thursday I made my powerpoint and added all the needed info. 2 Steps Taken to Reach Objective: Objective (s): Assigned CIM project and I researched lean engineering. Work in Lab if finished. List issues / Complications: 1 3 4 Worked in lab helping with the throttle getting it set right. none I started by researching lean and found out when it was originated and who invented it. Friday We got the spring fit and it worked fine. 2 Steps Taken to Reach Objective: Objective (s): Work in the lab on formula throttle and clean. List issues / Complications: 1 3 4 I started wire brushing the chassis to get it prepped for paint. Couldn’t get throttle to return all the way. I found out that we needed a spring to return the throttle so I got a spring and drilled into the throttle to install a spring.